Standards developed by AIB members

Members of the Australian Institute of Building (AIB) participate in the development of Australian Standards used within the building and construction industry as a representative of AIB on various committees.

BD-001 Steel Structures technical committee
AS1538 Cold-formed steel structures code
AS4011 Steel structures
   
BD-013 External water proofing membranes technical committee
-- ---- External waterproofing membrane systems
   
BD-029 Damp proof courses and flashings technical committee
AS2904 Damp-proof courses and flashings - methods of test
AS4347 Damp-proof courses and flashings - methods of test
   
BD-040 Fibre cement building products technical committee
AS1562.2 Design and installation of sheet roof and wall cladding
- Corrugated fibre-reinforced cement
AS1639 The design and installation of corrugated fibre-reinforced cement roofing and wall cladding
AS2908 Cellulose-cement products
   
BD-048 Pliable building membranes technical committee
AS4200 Pliable building membranes and underlays
   
BD-052 Trade and technical literature for the building industry c'tee
AS1388 Guidelines for technical information for building and construction products
   
BD-085 Inspection of buildings technical committee
AS4349 Inspection of buildings
   
CE-014 Measurement of civil engineering quantities technical c'tee
AS1181 Method of measurement of civil engineering works and associated building works
   
CH-072 Safety in house design technical committee
  - No documents currently listed
   
FP-018

Fire safety technical committee

AS1530 Methods for fire tests on building materials,
components and structures
AS2122 Combustion characteristics of plastics
AS2484 Fire - Glossary of terms
AS3758 Guide to the evaluation of the effectiveness of fire retardants
AS3837 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter
AS/ISO9239 Reaction to fire tests for floor coverings
AS/ISO3705 Fire tests - Full-scale room test for surface products
   
FP-019 Passive fire protection technical committee
AS1905 Components for the protection of openings in fire-resistant walls
AS3784 Coatings for fire protection of building elements
AS4072 Components for the protection of openings in
fire-resistant separating elements
   
FP-021 Fire safety audits technical committee
AS4655 Fire safety audits
   
ME-005 Cranes technical committee
AS1403 Design of rotating steel shafts
AS1418 Cranes, hoists and winches
AS2549 Cranes (including hoists and winches)
AS2550 Cranes, hoists and winches - Safe use
AS3990 Mechanical equipment - Steelwork
AS4991 Lifting devices
   
ME-064 Access for people with disabilities technical committee
AS1428 Design for access and mobility
- General requirements for access
AS4299 Adaptable housing
   
PL-004 Plastic building elements
  - No documents currently listed
   
TM-002 Timber framing elements technical committee
AS1684 Residential timber-framed construction
AS4440 Installation of nailplated timber roof trusses
AS4446 Manufacture of nailplate-joined timber products
   
WS-008 Fibre reinforced concrete pipes and fittings committee
AS4139 Fibre reinforced concrete pipes and fittings

AIB members willingly give their time and expertise to advance the principles and practices of standardization, and their contribution to Australia’s wellbeing cannot be overestimated. For information on participating in this process visit the following section of the Institute's website:

AIB Member participation in standards development

Each of these Australian Standards can be purchased directly from SAI Global and for further information visit www.standards.com.au

 

The Australian Institute of Building
Tel
Fax
E-mai
l
+61 2 6247 7433
+61 2 6248 9030
ausbuild@aib.org.au
 
AIB Building Codes & Standards:
 - AIB Providing industry leadership
 - Building Code of Australia
Australian Standards Development:
 - How standards are written
 - Standards developed by members
 - Committee representation
 - Member participation
 
STANDARDS REPS CHANGE THE INDUSTRY 
 
 
Home  |  Sitemap  |  Search  |  Contact AIB © 2004 The Australian Institute of Building  |  Privacy policy